Experiement Conclusion

At 12:30, I had to move the cooker out of the shade, and onto a bucket. I tipped it back slightly to capture more sunlight.

I put 2 cups of tap water out, again at 85F in the same configuration as the distilled water.

At 12:55, the water temp had climbed to 150F.

I didn't check this again for 45 minutes, and the water was up to 200F. I repositioned the cooker, to face the sun better.

At 2pm, the water was boiling.

Pros of this cooker:

I am pleased with this cooker, and its cooking capabilities.

It is definitely more 'permanent' than my cardboard panel cooker, and much easier to store.

The steel bowls are light weight and relatively inexpensive. The two bowls cost $10 each, and I will need a new reflector soon, so for about the price of a CooKit, I have a cooker that will last for years, instead of one season.

Finally, the bowls can be used for other things.

If you don't have a resturant supply store in your town, check my links for online stores where you can purchases these mixing bowls.

Cons of this cooker:

The interior of the cooking bowl will need a lot of protection to prevent scratches marring the surface.

I will need to experiment more to perfect the focusing of this cooker to maximize the solar capturing and heating potential. I may need to raise the pots higher for instance.

With a panel cooker, all the research has been done; you just set up the cooker and face it towards the sun.

Experiment Details

I set the cooker out, on the cement, at 11:30 am with 2 cups of distilled water.






By 12 noon, the temperature had gone from 85F to 150F. I turned the cooker a small amount to keep it focused on the sun.


By 12:30 pm, the temperature was up to 200F... when I brought that water in the house to make tea.

Experiments- This cooker Boils!

July 21, 2008, with a UV Index between 11-12, I did an official experiment with my twin steel bowl cooker.

I used:

* A 3 cup pot & a glass lid (that I removed the plastic handle)

* A pyrex mixing bowl

* On top of the Bowl is a lid from an old crock pot.

The pot sits on a black candle holder, to elevate it off the bottom of the bowl. That is the shiny surface in the bottom of the bowl.

The bowl sits on what I'm guessing was a plate stand or plant stand of some kind. Having the bowl in this stand allows me to tip the bowl- as the cooker must be tipped to catch the sun- and still keep the pot level.

More about the Steel Bowl Cooker

I used pinch style paper clips to attach the ends of the windshield shade to lip of the bottom bowl in the front.

I used a third clip at the back (where the depression is for the rear view mirror) to fill in that gap and get the shade to conform to the shape of the bowl better.

3 pots in one day

Tuesday this week, I cooked three different things with three different cookers.
Ham and Taters
Navy & Vege soup
Lemon Blueberry (Whole Wheat) coffee cake

Steel Bowl Cooker

I took 2 steel mixing bowls, added a car reflector and created a solar cooker similar to a Parvati or a Parabolic cooker.

ARNie's Roaster Solar Oven- details

I bought my stainless steel roaster at my local Target, and here it is listed at the Target Website... unfortunately... it is out of stock. I fear it may be discontinued. You might try writing to the company to find out who makes the roaster, and order it from them directly. The Roaster was in a clearance section with no box, and if it had any other packaging information, I threw it away long ago.

Stainless Steel Dome Roaster